Guides

What size dumpster do I need for roofing shingles?

Last updated November 19, 2026 · Facts checked November 19, 2026

Roofing debris is a weight problem more than a volume problem. A tall 30- or 40-yard box is rarely the right default for shingles, even on a large roof, because the included tons and the truck’s lift limit arrive first.

The figures below are published calculator averages, hauler examples, and capacity notes checked on November 19, 2026. They are not a manufacturer’s specification and not a quote. Confirm the shingle product, the number of layers, and the included weight on the rental.

Start with squares, then weight

A roofing square is 100 square feet of roof area. Dumpsters.com’s shingle-weight calculator also notes that asphalt shingles are typically sold as three bundles per square, or about 33 square feet per bundle.

That company’s published average weights:

Material (Dumpsters.com averages) Pounds per square Pounds per bundle
Three-tab asphalt 230–250 50–80
Architectural asphalt 400–430 65–80
Slate 800–1,000 —

These are Dumpsters.com’s calculator averages, not a sheet we opened from a manufacturer. Architectural-shingle weights in particular vary by product. Use the calculator figures as that company’s published starting point, then confirm the actual product and how many layers will come off. A second layer roughly doubles the weight for the same roof area; decking, felt, flashing, and underlayment add more.

A local worked example: Red Hawk uses about 250 pounds per square. At that figure, a 20-square single-layer tear-off is about 5,000 pounds — already over the 4,000-pound allowance on that company’s 20-yard.

What size box?

Dumpsters.com’s roofing dumpster page says jobs typically use a 10- to 30-yard container depending on the material, and that “a 10 yard dumpster is the best choice for roofing projects.” Fill only partway. The same company’s calculator says a 10-yard holds approximately:

  • 10–15 squares of asphalt shingles, or
  • 4–6 squares of slate.

For a whole-roof tear-off larger than that, the usual pattern is a second 10-yard (or a swap), not a tower of shingles in a 40-yard. Dumpsters.com’s pricing page lists a roofing example of one or two 10-yard dumpsters at $336–$435 per dumpster (customer-paid range, updated October 2026). That is that company’s range, not a local quote. See how much a dumpster rental costs.

If a company offers a 20- or 30-yard for roofing, compare the included tons, not only the yard size. The weight-limits guide has published overage rates and the full-then-empty scale method.

Some haulers restrict heavy debris to a short 10-yard, sometimes only with advance approval (Blake Waste is one local example). Ask before you assume a larger box is allowed to be loaded with shingles.

Hazardous-waste questions

Dumpsters.com says most shingles are not hazardous unless they contain asbestos, and that dry, hard roofing tar is often allowed, with a local confirmation. Liquid tar, solvents, and other chemicals do not belong in the roll-off. If the roof may be old enough to contain asbestos, have the material tested and follow the disposal path your state and the landfill require. For other banned or restricted items, see what not to put in a dumpster.

A simple way to plan the rental

  1. Measure or estimate the roof in squares (roof area in square feet ÷ 100).
  2. Confirm the shingle type and the number of layers.
  3. Estimate the weight from a published figure — Dumpsters.com’s averages, or the hauler’s own rule of thumb — and add felt, flashing, and any wood.
  4. Compare that weight to the included tons and to the 10-yard capacity figures above.
  5. Book a 10-yard (or two), or a larger box only if the included weight and the hauler’s heavy-debris rules actually cover the load.
  6. Put boards down if the box will sit on a driveway; shingles are a dense load. See driveway placement.

FAQ

What size dumpster for shingles? Often a 10-yard, filled only partway, and sometimes two of them. Confirm weight, not just volume.

How much does a square weigh? Dumpsters.com’s published averages are 230–250 lb for three-tab asphalt, 400–430 lb for architectural asphalt, and 800–1,000 lb for slate. Confirm the product and layers. Red Hawk’s local example uses about 250 lb per square.

How many squares in a 10-yard? About 10–15 asphalt or 4–6 slate, per Dumpsters.com, filled partway.

Can I use a 20-yard? Only if the included weight covers the tear-off. A 20-square job at 250 lb/square is already about 5,000 lb.

Sources

Checked on November 19, 2026.

  1. Dumpsters.com, Shingle Weight Calculator. Square definition, bundles, average weights, 10-yard capacity in squares.
  2. Dumpsters.com, Roofing Dumpster. Typical 10–30 yard range, 10-yard as the usual choice, fill-partway note, asbestos and roofing-tar comments.
  3. Dumpsters.com, roll-off prices. October 2026 roofing project example, $336–$435 per 10-yard.
  4. Red Hawk Dumpsters, 20-Yard. ~250 lb/square worked example and 4,000-lb included weight.
  5. Blake Waste, Raleigh. Heavy debris only in the 10-yard with advance approval.

Facts not verified on this page

  • Manufacturer technical-data-sheet weights for a named shingle product. An official CertainTeed weight PDF we tried to open did not load (HTTP 500), so this page does not treat Dumpsters.com’s architectural average as a factory specification.
  • The actual weight of a specific roof, including layers, felt, and decking.
  • Whether a given landfill treats a particular shingle as asbestos-containing.